The Mullion reader integrates effectively with our WS4 Web server controller, supporting 13.56 MHz credentials and communicating via our distinctive RS-485 protocol.
The configuration and the firmware update can be done using our Product Manager software via the USB-C input on the back of the reader or with a programming card.
The XPM products are coming with the Xsecure® key, but only products ending in -X are coming with the Xsecure® configuration by default to ensure data protection.
Features Specifications Support Related products
Xsecure Solution
The Xsecure solution is based on the concept of writing the identifier as data on pre-coded MIFARE® DESFire® EV3 13.56 MHz cards. Xsecure enables each card access key to be distinct and unique, produced through an irreversible diversification process. As a result, the data on the card is encrypted and sealed again, with an error checking against spoofing. Only the reader and the production card encoding system are aware of this operation. XPR encodes the cards and validates the identifiers issued to avoid duplication.
Front tricolour LED
The state of the reader is displayed by a front smart and thin triolour LED. When the card or key fob is presented, the LED transitions from blue to green if the access is granted, or from blue to red if it is denied. A prominent blue LED illuminates when the reader is connected and ready to receive credentials (idle mode).
Mullion reader
The XPM-MF-RS / XPM-MF-RS-X features a slim and narrow design, making it ideal for door frames or mullions with limited space.
Mullion readers are a practical solution for access control in areas with limited mounting space, providing security and convenience without compromising the design aesthetics of the entryway.
Mifare
The XPM-MF-RS and XPM-MF-RS-X read Mifare CSN, DESfire and Xsecure credentials with a read range of up to 9 cm.
Plug and Play
The Xpro readers' Plug and Play system simplifies installation and offers secure and flexible access management options. The readers are pre-configured and ready to connect with the solution of your choice. This saves both time and resources when implementing the access control system.
Connectivity
A: USB-C connector for configuration management and firmware updates in order to ensure optimal performance and functionality.
B: Wire terminals with distinct functions: Power and RS-485
| Mounting: | Surface mount |
|---|---|
| Housing: | Polycarbonate copolymer (UL94) |
| Internal buzzer: | With adjustable intensity using software |
| Communication: | RS-485 |
| Reading range: | Up to 9 cm, depending on the tag type and size |
| Operating frequency: | 13.56 MHz |
| Tamper protection: | Yes |
| Wiring: | Terminal block |
| Operating voltage: | 9 - 15 V DC |
| Max. consumption at 12 V DC: | 100 mA |
| Supported Credentials: | Xsecure®, Mifare CSN (Classic, DESfire, Plus, Ultralight), Mifare DESfire (EV1, EV2, EV3) |
| Dimensions: | 113 x 42 x 27 mm |
| Weight: | ~0.10 kg |
| ENVIRONMENTAL FEATURES | |
| Environmental rating: | Indoor/ Outdoor IP65 (resin potted) |
| Operating temperature: | -30°C to +70°C |
| Operating humidity: | 0% to 95% RH (non-condensing) |
| Impact protection rating: | IK 11 |
¹ All product specifications are subject to change without notice.
*The XPM products are coming with the Xsecure key, but only the products ending in -X are coming with the Xsecure configuration by default.
Subscribe to our newsletter
