The DINMTPX-MF-SA can be programmed with a built-in micro-USB function or desktop card enrolment, depending on the version. Events can be downloaded onto master MIFARE cards which also could be used to activate and program additional readers on site.
Features Specifications Support Related products
Easy configuration
The DINMTPX-MF-SA can be configured via a USB connection or card configuration. There is a Micro USB connector on the back of the reader for easy programming through PC.
With the cards, you only need to program them from the software and afterwards you can easily make the reader initialization, configuration and event collecting.
Large LED around the sensor for an easy reading of the status
DINMTPX-MF-SA has a multicolour rectangular status LED. The RFID reader changes colour if the user’s key fob is idle (orange), accepted (green) or denied (red).
Available in different colours
The DIN Range is availabe in 3 colours by default: silver, charcoal and white. Three colours that usually go very well with any décor or building design.
And for those who want something different, there are more colours available upon request, like white, green, blue, red, gold… You will defenitely have many options to choose from.
Mifare RFID reader
The DINMTPX-MF-SA is a Mifare read/write reader. It can support Mifare Classic 1K and 4K memory.
The credit on-card option is also available with this reader with software configuration.
Easy mounting
It cannot be easier to complete any flush mount. Each piece matches perfectly with the next, and they can be installed in any standard electrical gang box. (The mask and the electronics are sold separately.) The mask is available in UK and European standards.
| Mounting: | Flush mount reader |
|---|---|
| Mask: | ABS (sold separately) |
| Colours: | Silver, charcoal, white |
| Technology: | RFID |
| Users capacity: | Unlimited |
| Read range: | Up to 6 cm |
| Programming: | By USB or by cards |
| Output: | 1 built-in relay (2A; 24V AC/DC) RS-485 for remote relay unit RU2, DINRTT, RTT |
| Relay time: | Trigger 1-255 s or toggle |
| Visible signal: | Green LED: Access granted
Red LED: Access denied Orange LED: Idle mode |
| Audible signal: | Internal buzzer |
| Exit button input: | Yes |
| Tamper protection: | Yes |
| Voltage: | 12 V DC |
| Consumption: | Maximum 150 mA |
| Mechanical characteristics | |
| IP rating: | IP40 |
| Dimensions (L x H x W): | 80 x 80 x 9 mm |
| Weight: | ~150 g |
| Operating Temperature: | -20ºC to 50ºC |
| Operating Humidity: | 5% to 95% RH without condensation |
| Electronics | |
| DINMTPX-MF-SA-E: | DIN range - electronic only - SMART MIFARE RFID reader - built-in micro-USB - Hotel & Access solutions (off-line softwares) |
| Accessories | |
| DINFP: | ABS single frame for all DIN readers & devices - EU standard |
| DINFP-UK: | ABS single frame for all DIN readers & devices - UK standard |
| DINFP2H: | ABS single frame for all DIN readers & devices - Horizontal |
| DINFP2V: | ABS single frame for all DIN readers & devices - Vertical |
| * All product specifications are subject to change without notice. | |
Subscribe to our newsletter
