Elegant and compact 13.56 MHz reader. The housing, in ABS, comes with a big rectangular LED. Designed to be installed either outside or inside, it has an RS-485 bus. Its tricolor LED, tamper and buzzer are managed directly by the WS4 controllers. It can read Mifare Classic, Desfire and Ultralight.
Features Specifications Support Related products
MIFARE RFID Reader
The MTPX-RS-MF reads Mifare Classic, Ultralight and Desfire cards with a read range of 6 cm distance.
Mullion RFID reader
The MTPX-RS-MF with its slim ABS housing is suitable for doorframe mounting.
RS-485 output
It works with an RS-485 output, establishing a double communication between the reader and the WS4 controllers, reducing the number of wires needed in the installation.
Black Edition
The Black Edition represents a whole new family of products consisting of single or double technology, housed in an elegant black ABS case. From now on your RFID and biometric readers as well as keypad will be available with this housing.
| Mounting: | Surface |
|---|---|
| Housing: | ABS |
| Colours: | Black / Silver |
| Resin potted electronics: | Yes |
| Technology: | RFID |
| Reading type: | Mifare Classic, Desfire and Ultralight |
| Read range: | Up to 6 cm |
| Operating frequency: | 13.56 MHz |
| Output: | RS-485 |
| Visible signal: | Backlight LED (red, green, orange) controlled by the host |
| Audible signal: | 1 internal buzzer - managed by the host |
| Tamper: | Yes - managed by the host |
| Voltage: | 9-14 V DC |
| Consumption: | Max. 130 mA |
| MECHANICAL CHARACTERISTICS | |
| IP rating: | IP65 |
| Dimensions (L x H x W): | 51 x 92 x 27 mm |
| Weight: | ~0.15 kg |
| Operating temperature: | -20ºC to +50ºC |
| Operating humidity: | 0 to 95% (non-condensing) |
| VERSIONS | |
| MTPXBK-RS-MF V2: | ABS - Black |
| MTPXS-RS-MF V2: | ABS - Silver |
| * All product specifications are subject to change without notice. | |
Subscribe to our newsletter
