Powerful

The EWSI 2-door controller offers many options for access control. You can create up to 15,000 users and up to 30,000 events per controller. Connect 2 readers for 2-door application with 1 controller. Provided also with 2 door contacts, 2 Exit inputs, 2 free inputs and 2 free outputs for alarms and peripheral actions.

Distributed intelligence

Distributed intelligence. Native TCP/IP built-in module and RS-485 connection. Unlimited controllers per system. The system could be connected just in TCP/IP set-up and/or daisy-chained on RS-485 (up to 32 controllers on one bus). Each controller has its own memory chip and is completely standalone in case of communication failure.

Flexible

Programmable (Bitwise) Wiegand Interface (26 to 128 bits). Configurable free outputs, free inputs, exit inputs and door sensors. Possibility to connect proximity, keypads or biometric readers to readers inputs.

Anti-passback, Mantrap

Anti-passback, Mantrap, Scenarios, Muster reports.

Easy configuration by PROS CS

EWSI provides all the information requested by the readers. Creation of users via the PROS CS is user-friendly allowing to associate each user to different reader technologies: keypad, proximity and/or biometric readers (integrated finger templates enrolment). Software and firmware updates are available for the latest versions.

UH-PS3: a complete solution

UH-PS3 is a metal enclosure with an included power supply for EWS and EWSI controllers. It is possible to add up to two controllers in the same enclosure, using all its space and avoiding using a different enclosure.

EWSI in Lift Mode

The EWSI Controller can be put in Lift Mode to control the floor access and permit the use of elevator only by an authorized cardholder. One I/O Board RB0408 enables control of 8 floors. Max. of 4 RB0408 boards can be used per EWSI controller (32 floors). Through the Access levels, the cardholder can be allowed to access certain floors even in certain time zones.