B100PROX-EH-SA is a simple one-door standalone biometric and RFID system (or 2 doors when used with DINRTT). The reader programming is quick and easy. It can store up to 98 fingerprints and 2000 RFID cards. It has one integrated relay output and one exit button input.
If secure installation is needed, the reader can be connected to a remote relay unit in a secured area, which also plays the role of an exit push button.
Complete setup and programming can be done by swiping on the sensor.
It can read EM 4100 or HID-compatible cards.
Features Specifications Support Related products
Black Edition
In addition to the standard silver colour in aluminium finish, the MINI range is also supplied as standard in the Black Edition. It is a whole new standard product family in ruggedized and light black ABS finish with single and double technology.
Double Technology: Biometry Swipe and EH RFID
The B100PROX-EH-SA offers double technology with the following authentication: Finger or card.
The reader reads EM4002/4100 and HID 125 kHz compatible cards with a read range of up to 5 cm.
The SteelCoat protective coating provides added protection of the fingerprint sensor for rugged environments.
The matching time is < 2 s.
The storage capacity of the B100PROX-EH is 100 fingerprints and 2000 cards.
Easy programming
Complete setup and programming can be done by scrolling on the capacitive swipe sensor. All enroling of users is carried out by the reader, no PC is required. Once enroled, users simply swipe their finger or card to gain access.
Tamper switch
Sends a signal to the alarm when the biometric reader is opened and/or dismantled by force.
Large LED around the sensor for an easy reading of the status
Another key defining feature of the B100PROX-EH-SA is the multi-colour rectangular status LED. The RFID and biometric readers change colour depending on the user’s key fob/fingerprint. Three LED statuses are available:
- idle (orange) - no key fob/fingerprint present
- accepted (green) - key fob/fingerprint present
- denied (red) - not valid key fob/fingerprint present
| Mounting: | Surface |
|---|---|
| Housing: | Moulded aluminium/ABS |
| Colours: | Aluminium: silver
ABS: black |
| Resin potted electronic: | Yes |
| Technology: | Biometry + RFID |
| Templates: | 98 finger templates and 2000 cards |
| Sensor: | Swipe capacitive |
| Reading type: | EM4100 or HID compatible |
| Read range: | 2-5 cm |
| Programming: | By Master finger |
| Relay output: | 1 Relay N0/NC contact (2A /24V AC/DC) |
| Relay time: | Pulse (1-30 s) or toggle (ON/OFF) |
| Visible signal: | Tricolor status LED
Backlighting ON/OFF |
| Audible signal: | Programmable buzzer (ON/OFF) |
| Push Button Input: | Yes |
| Wiring: | 50 cm cable |
| Voltage: | 12 VDC |
| Consumption: | Max. 150 mA |
| Mechanical Characteristics | |
| Dimensions (L x H x W): | 100 x 94 x 30 mm |
| Weight: | ~0.2 kg |
| Operating temperature: | 0ºC to 50ºC |
| Operating humidity: | 5% to 93% RH non-condensing |
| IP rating: | IP 54 (internal use only) |
| Versions | |
| B100PROXS-EH-SA: | Metal, silver |
| B100PROXBK-EH-SA: | ABS, black |
| * All product specifications are subject to change without notice. | |
Subscribe to our newsletter
